|
LOW
COST 30"
x 24" CNC TABLE TOP
SERVO BALL SCREW GANTRY
Table
top Model with optional base/Spindle Motor and
CNC Controller
Table
top Model
DRIVE
SYSTEMS GROUP LC Series Gantry machines are
now available in a Tabletop Model and with optional
base. The LCT 3024 Servo Gantry has a XY work
envelope of 30" x 24", with closed-loop
servomotor drives Motors/ and ball screws on
all three axes. The unit comes standard with
a 6" Gantry Clearance with a 14" option
also available. Ideal for milling and cutting
applications. Three servomotor and two ball
screw pitch options are available so this unit
can really move.
Large
Travel, Small Footprint
CNC
FEATURES:
-Servo Motors For
High Speed, High Power performance
-Ball
Screw Drives For
accurate cuts and machine longevity
-Heavy-Duty Rails For
machine rigidity
Standard 6''
Gantry Clearance
AVAILABLE OPTIONS:
-2 or 3 axis
-5 or 20mm Ball Screw Pitch
-14" Gantry Clearance
-3 Servomotor Options
-Vacuum Table Setup
-Safety Enclosure
-Optional Base
-High Speed 800watt Spindle
Motor
The Low Power (S)/(L) and Medium
Power (V) Options only work with the 5mm Pitch;
the High Power (H) Option only works with the
20mm Pitch
Part Number Selection Steps:
1. Select features to build a Part Number (i.e.
# of Axes, Gantry Clearance, etc.).
EXAMPLE: HX33HBM3032414 is the Part Number for
a LCT 3024, 110V, 3-axis, High Power Servomotor
Tabletop Gantry with a 14" Z-axis clearance
and 20mm Pitch on the ball screw.
Application Notes: Speeds
For speeds to 250 inches
per minute (max.) choose Low Power (L)
For speeds to 400 inches per minute (max.) choose
Medium Power (V)
For speeds to 1500 inches per minute (max.)
choose Low Power (H)
LC 3024 Table Top Gantry:
-2-3 Axis, Servo Motors with
encoders and Servo Drives, 110vac
-PCI servo card with CNC
software accepts nc or g-code files
-XY Axes Travel: 30" x 24" (762mm
x 609mm)
-Gantry Clearance: 6" or 14"
-Table surface: 29.5" x 49.2"(750mm
x 1250mm)
-Drive System: Ball screws with anti-backlash
ball nuts.
-(0.63" [16mm], pitch .19" [5mm])
-Repeatability: +/- 0.0004 in
-Accuracy: +/- 0.0004 in/in
-Four patented double recirculating linear ball-bearing
blocks on each axis. T-slots on 50mm centers
for mounting.
-Work surface flatness: 0.008"/ft
Software
CNC Interface
CNC Preview
CNC Setup
|
