LOW
COST 30"
x 24" TABLE TOP BALL
SCREW GANTRY
DRIVE
SYSTEMS GROUP LC Series Gantry machines are
now available in a Tabletop Model. The LCT 3024
Servo Gantry has a XY work envelope of 30"
x 24", with closed-loop servomotor drives
OR Stepper Motors/Drivers and ball screws on
all three axes. The unit comes standard with
a 6" Gantry Clearance with a 14" option
also available. Ideal for pick-and-place, dispensing,
positioning, milling and cutting applications.
Three servomotor OR stepper and two ball screw
pitch options are available so this unit can
really move.
Large
Travel, Small Footprint
CNC
FEATURES:
-Servo Motors For
High Speed, High Power performance
-Stepper Motors For
Low Cost, Lower Speed, Lower Power
-Ball
Screw Drives For
accurate cuts and machine longevity
-Heavy-Duty Rails For
machine rigidity
Standard 6''
Gantry Clearance
AVAILABLE OPTIONS:
-2 or 3 axis
-5 or 20mm Ball Screw Pitch
-14" Gantry Clearance
-3 Servomotor and Step Motor/Driver Options
-Vacuum Table Setup
-Safety Enclosure
 S
- Low Power Stepper
The Low Power (S)/(L) and Medium
Power (V) Options only work with the 5mm Pitch;
the High Power (H) Option only works with the
20mm Pitch
Part Number Selection Steps:
1. Select features to build a Part Number (i.e.
# of Axes, Gantry Clearance, etc.).
EXAMPLE: HX33HBM3032414 is the Part Number for
a LCT 3024, 110V, 3-axis, High Power Servomotor
Tabletop Gantry with a 14" Z-axis clearance
and 20mm Pitch on the ball screw.
Application Notes: Speeds
For speeds to 75 inches
per minute (max.) choose Low Power (S)
For speeds to 250 inches per minute (max.) choose
Low Power (L)
For speeds to 400 inches per minute (max.) choose
Medium Power (V)
For speeds to 1500 inches per minute (max.)
choose Low Power (H)
HX32SBM3022410
$ 10,750.00 USD
fob Mississuaga, Ontario
1 LC 3024 Table Top Gantry:
-2 Axis, Step motors with built
in microstepping drivers, 110vac power supply
kit
-XY Axes Travel: 30"
x 24" (762mm x 609mm)
-Gantry Clearance: 6" (152mm)
-Table surface: 29.5" x 49.2"(750mm
x 1250mm)
-Drive System: Ball screws with anti-backlash
ball nuts.
-(0.63" [16mm], pitch .19" [5mm])
-Repeatability: +/- 0.0004 in
-Accuracy: +/- 0.0004 in/in
-Four patented double recirculating linear ball-bearing
blocks on each axis. T-slots on 50mm centers
for mounting.
-Work surface flatness: 0.008"/ft
|
